Yes, Vinegar Allows You to Clean the Washing Machine Thoroughly: Here’s How to Use It

Your washing machine works hard to keep your clothes clean, but over time, it can accumulate dirt, soap residue, mold, and bacteria. Regular cleaning not only extends its lifespan but also ensures your laundry stays fresh and odor-free. Vinegar, a natural and affordable solution, can deep-clean your washing machine effectively without harsh chemicals. Here’s a detailed guide on how to clean your washing machine thoroughly using vinegar.

Why Use Vinegar?

Vinegar is a natural cleaning agent with powerful properties:

1. Deodorizer: Neutralizes bad odors caused by mold and mildew.
2. Degreaser: Dissolves soap scum and detergent build-up.
3. Disinfectant: Eliminates bacteria, germs, and mold spores.
4. Eco-Friendly: Safe for your machine, pipes, and the environment.

Step-by-Step Guide to Cleaning Your Washing Machine with Vinegar

1. Gather Your Supplies

• White distilled vinegar (do not use flavored or colored vinegar)
• Baking soda (optional, for added cleaning power)
• A microfiber cloth or sponge
• An old toothbrush (for hard-to-reach areas)

2. Cleaning the Drum

Front-Load Machines:

1. Set the Cycle: Run your washing machine on the hottest water setting and longest cycle.
2. Add Vinegar: Pour 2 cups of white vinegar directly into the drum.
3. Run the Machine: Start the cycle and let the vinegar break down residue and kill bacteria.

Top-Load Machines:

1. Fill with Hot Water: Set the machine to its largest load setting and fill it with hot water.
2. Add Vinegar: Pour 4 cups of white vinegar into the water.
3. Agitate and Soak: Let the machine run for a minute to mix the vinegar, then stop it and let it soak for an hour.
4. Restart the Cycle: After soaking, let the cycle finish.

3. Cleaning the Detergent Dispensers

1. Remove the Trays: If your machine allows it, take out the detergent and fabric softener dispensers.
2. Soak in Vinegar: Place them in a bowl of hot water with 1 cup of vinegar for 30 minutes.
3. Scrub Clean: Use an old toothbrush to scrub away any residue or mold. Rinse thoroughly and let them air-dry.

4. Cleaning the Gasket (Front-Load Machines)

The rubber gasket is a common place for mold and mildew to accumulate.

1. Inspect the Gasket: Check for debris, lint, or mold between the folds of the rubber.
2. Wipe with Vinegar: Soak a cloth in undiluted vinegar and wipe the gasket thoroughly.
3. Scrub Stubborn Spots: Use an old toothbrush for hard-to-reach areas.
4. Dry: Leave the door open to let the gasket air-dry completely.

5. Cleaning the Filter and Drain

1. Locate the Filter: Check your machine’s manual to locate the filter and drain hose.
2. Remove and Clean: Empty the filter of any lint or debris, then rinse it under hot water. Soak it in vinegar if it’s heavily soiled.
3. Flush the Drain Hose: Pour a mixture of hot water and vinegar (2:1 ratio) through the drain hose to remove any buildup.

6. Optional: Baking Soda for Extra Freshness

TO CONTINUE READING THE ARTICLE PLEASE SEE PAGE 2